Tuesday, May 31, 2011

Hultafors HVK Review

The Hultafors knives have been taking a larger and larger share of Mora’s market, with knives that are fairly similar in design. With respect to the bushcraft community, the Hultafors HVK has made serious gains in popularity.
















Specifications:
Knife Length: 8 1/4 inches (210 mm)
Blade Length: 3 11/16 inches (94 mm)
Blade Thickness: 3/32 inches (2 mm)
Blade Width: 23/32 inches (18 mm)
Blade Material: Unknown Japanese carbon steel
Blade Hardness: HRC 58-60 on the Rockwell Scale
Type of Tang: Partial concealed
Blade Grind: Scandinavian with a very small secondary bevel
Handle Material: Plastic
Sheath Material: Plastic
Cost: $12.00
















The Hultafors HVK is a cheap knife, and even though it has been hard to find them in the US, more and more distributors are starting to sell them here. Even getting it shipped over form the UK should keep the price down to under $15.00.

When compared to the Mora 1, the Hultaforst HVK has an almost identical blade, with a very similar grind. The thickness, width and length are about the same, but the Hultafors HVK has a very slight secondary bevel at the edge unlike the Mora 1. The handle on the HVK is a little thinner and noticeably longer than that of the Mora 1. It is quite comfortable. If does have a finger guard, which I find uncomfortable. It is a lot more comfortable to use for wood working tasks than the more robust Hultafors GK because of the narrower blade, but the finger guard on the handle still limits certain grips.































The Hultafors HVK has a concealed partial tang. Just like with the GK model, the connection to the handle felt very secure. The picture was not taken by me.













The knife had no problem with light splitting and batoning. The blade is thin, so while it will eventually go through the wood, it is not nearly as good of a splitter as the more robust GK model.
















The knife feels very secure, so I had no problem truncating with it. The slight secondary bevel on the edge helps to prevent rolling.
















The knife came sharp, so there was no problem with making some feather sticks.
















The sheath of the Hultafors HVK is of higher quality than that of the Mora 1. It holds the knife securely and has a good belt attachment. It is still a cheap plastic sheath, so you shouldn’t expect too much, but it is very usable.

Overall, I like the Hultafors HVK a lot more than I did the GK model. The blade is thin and narrow just like that of the Mora 1, which makes it good for more intricate tasks. Of course, those characteristics make it less effective at heavier tasks such as batoning. The handle is not my favorite. I tend to like shorter handles, but that is a personal preference. I found the finger guard to get in the way a good chunk of the time, so if I was to use this knife, I would probably try to remove it. For the price, not bad at all.

No comments:

Post a Comment